Streamyx Quick Setup (Innacomm W3400V6)

This how-to is for the antenna less orange modem (Innacomm W3400V6) that was supplied by TM. This is a Wireless G ADSL 2+ modem. The latest version Wi-Fi is Wireless AC and the becoming affordable good wireless is the Wireless N as of this writing in 2013.

Why TM provides Wireless G to me on my 2Mbps subscription is beyond me. I think TM being stingy and this modem is the worse TM modem ever. That said, this is probably the first ipv6 capable modem TM ever provided.

Step One: Log in to your modem with Mac or Windows

Innacomm Wireless W3400V6 Login
Innacomm Wireless W3400V6 Login Innacomm W3400V6 login page

This is not your typical admin/admin login. It is slightly technical and if this is your first time, it may be confusing. The good news is, once you logged in the modem, the quick setup is really straightforward and easy to do.

  1. Open your browser and point to http://192.168.1.1
  2. Username: tmadmin
    Password: Adm@_ _ _ _ (followed by the 4 last digit of the Mac ID found on your orange box or underneath the modem it self)
  3. Select “Quick Setup Mode“
Innacomm Mac ID
Innacomm Mac ID Where your Mac ID is found

Step Two: Setup Streamyx connection with username & Password

Innacomm Wireless W3400V6 Step 1-
  1. Connection Type: Select “Router mode”
  2. Type in your Streamyx username
  3. Type in your Streamyx password
  4. Select “Enable IPv6“

TM has since activated IPv6 for its customer. By enabling IPv6, it doesn’t make your internet connection superior; if you’re wondering. TM randomly auto assign IPv4 and IPv6 when you connected to the internet.

Step Three: Setup SSID

Innacomm Wireless W3400V6 Step 2-
  1. Wireless ID: Give your wireless network a special name.
  2. Security Type: Select “WPA”
  3. Network Key: Type in a strong 13 characters password (Max 64 characters).
    (Pair with capital & small letter, numbers and special symbols ~!@#$%^&*() password)

Step 4: Verify details, click “Save” and you’re done!

Innacomm Wireless W3400V6 Step 3-

Good luck and happy surfing!

Sent from my iPad

162 responses to “Streamyx Quick Setup (Innacomm W3400V6)”

« Older Comments
Newer Comments »

  2. hi, i already follow the 1st and 2nd step.. but it says, authentication fail. If my last 4 digit H123, then i should put the password Adm@H123? the ‘H’ need to be capitalised also?

    • Hi, yes you need to follow exactly. It’s case sensitive.

      If it doesn’t work, you will need to refer to your modem manual or the box to see if the ID/password was printed there.

  3. how can i blocked other user using my wifi? i doesn;t want to change password bcoz no point i changed many times

  5. Hi, I have a problem with my connection to PS4 as my NAT type is 3 which restricted me to online with other player. Could u please to give an advice to set up a connection to change the NAT type to type 2?

  6. Hello,
    I wan to enable QoS to reduce ping, can you teach me? Thanks.

  7. Hello,
    I wan to enable QoS to reduce ping, can you teach me? Thanks

  8. Hello,
    Im using this tm modem too, recently this modem internet light suddenly off and disconnected, then its DSL, LAN lights off too and TM logo light changed to red color and it auto restart the connection. This have happen many times.
    Is this a modem problem/ faulty or tm line problems ?
    Pls advise.
    Thanks

    • Hi James,

      If you have use this modem for few years, probably it’s time to buy a new one.

      If the logo keep getting red I believe the internet connection is having some issue.

      Call 100, they can trouble shoot for you on the spot. The easiest to reach out to TM is via your TM online account (mytm.tm.com.my) use the chat system to talk to them.

  9. hi , as written this box is a ‘ G ‘ version ?
    can we update it ourself to ‘ AC ‘ or ‘ N ‘ ?
    as per the instructions / step by step ?
    Tq

    • change the wifi password mode (Authentication Type) to WPA2 after change the Encryption to AES and change the wireless mode to n

« Older Comments
Newer Comments »