Navigation

Innacomm Wireless W3400V6 Login-

Streamyx Quick Setup (Innacomm W3400V6)

By on November 5, 2013 in How-To

This how-to is for the antenna less orange modem (Innacomm W3400V6) that was supplied by TM. This is a Wireless G ADSL 2+ modem. The latest version Wi-Fi is Wireless AC and the becoming affordable good wireless is the Wireless N as of this writing in 2013.

Why TM provides Wireless G to me on my 2Mbps subscription is beyond me. I think TM being stingy and this modem is the worse TM modem ever. That said, this is probably the first ipv6 capable modem TM ever provided.

Step One: Log in to your modem with Mac or Windows

Innacomm Wireless W3400V6 Login
Innacomm Wireless W3400V6 Login Innacomm W3400V6 login page

This is not your typical admin/admin login. It is slightly technical and if this is your first time, it may be confusing. The good news is, once you logged in the modem, the quick setup is really straightforward and easy to do.

  1. Open your browser and point to http://192.168.1.1
  2. Username: tmadmin
    Password: Adm@_ _ _ _ (followed by the 4 last digit of the Mac ID found on your orange box or underneath the modem it self)
  3. Select “Quick Setup Mode“
Innacomm Mac ID
Innacomm Mac ID Where your Mac ID is found

Step Two: Setup Streamyx connection with username & Password

Innacomm Wireless W3400V6 Step 1-
  1. Connection Type: Select “Router mode”
  2. Type in your Streamyx username
  3. Type in your Streamyx password
  4. Select “Enable IPv6“

TM has since activated IPv6 for its customer. By enabling IPv6, it doesn’t make your internet connection superior; if you’re wondering. TM randomly auto assign IPv4 and IPv6 when you connected to the internet.

Step Three: Setup SSID

Innacomm Wireless W3400V6 Step 2-
  1. Wireless ID: Give your wireless network a special name.
  2. Security Type: Select “WPA”
  3. Network Key: Type in a strong 13 characters password (Max 64 characters).
    (Pair with capital & small letter, numbers and special symbols ~!@#$%^&*() password)

Step 4: Verify details, click “Save” and you’re done!

Innacomm Wireless W3400V6 Step 3-

Good luck and happy surfing!

, , , ,

162 Responses to Streamyx Quick Setup (Innacomm W3400V6)

  1. mrjoyz June 1, 2015 at 9:04 pm #

    how to reset the internet connection bcoz the connection is too slow..im using 4mbps..even i download filw 10mb it takes time to 1hour…

    • Thisbeast June 1, 2015 at 9:38 pm #

      Maybe you want to restart your modem and try again

    • Thisbeast June 1, 2015 at 9:38 pm #

      Also you can change your WiFi password, in case someone else is using your line.

    • Thisbeast June 1, 2015 at 9:39 pm #

      Or else just call 100 to ask TM to check. Maybe your area has got a cable iasue

      • mrjoyz June 1, 2015 at 9:42 pm #

        thanks a lot dude

  2. Nadiah May 6, 2015 at 12:20 pm #

    Hi,
    Really need your help here. Been using this modem with no problem on my 2 laptops and mobile phones. however, once I got my new macbook pro, it just can’t connect to the wifi at all. What should I do. From what I know, connection is under WEP. Is there any issue? Thanks!

    • Thisbeast May 6, 2015 at 1:24 pm #

      I’m not sure if the newer OS on MacBook Pro or any other Mac really allow/support WEP. You might want to try set your modem to WPA/WPA2.

      I saw a forum, people having your same issue with new Mac.

      Try change the WiFi setting on your modem to WPA/WPA2

      • Nadiah May 7, 2015 at 11:16 am #

        Thanks a lot! will give it a try.

  3. jek john May 2, 2015 at 9:12 pm #

    how to use phone to setup modem?

    • Thisbeast May 5, 2015 at 8:41 pm #

      I’m not sure. You would first need to connect to the WiFi — I’m not sure what’s the default WiFI access to this modem. Some modem like Belkin have already preconfigured WiFi access which you can connect with any WiFi devices (with your phone). Unless you owned a Belkin, I’m not sure other modem have preconfigured WiFi. You can try though. (check the manual)

  4. Avash Wangbu April 5, 2015 at 3:52 am #

    Hi there,
    Been using TM Streamyx (Innacomm) modem but I’ve reset it. I’ve followed the hands out but can’t configure the setting. will please help me how can I configure my Modem ?

  5. frankyean March 30, 2015 at 8:16 am #

    needs help…. after i reset my modem, n i had follow the steps in logging in.. using
    user: tmadmin
    pass: Adm@FF32 (shown at the bottom of modem)
    but still, i cant access to the modem… keep showing me invalid username or password

    • Thisbeast March 30, 2015 at 1:52 pm #

      Is your modem new? TM fix it for you? I have one that was fixed by TM and I have never reset the modem, so I’m not sure whats the password. You can try;

      userid: admin
      password: admin

      See if it work.

      Please make sure you use a cable, not over the wifi. (though I doubt you’re using wifi 🙂 )

      • Frankyean March 30, 2015 at 6:36 pm #

        I’m using the w7100 modem provided from tm.. And I also used the cable for connection… Will try for admin/admin

    • Avash Wangbu April 5, 2015 at 3:57 am #

      Having same problem #Frankyean. How about now, did you fix it ? I am waiting for technician.
      Need assistance Plz share your solutions.

  6. Rapheal Tan March 11, 2015 at 11:55 pm #

    How do I change my innacomm w3400v6 router to my D-Link DSL-2640B router? HOpe u don’t mind to share step by step on how to..thanks

    • Thisbeast March 13, 2015 at 12:29 am #

      Hi, actually you can follow the same instructions here. It’s a same configuration; maybe slightly different but actually the same. If I make sense. Hahaha

  7. JURIN March 6, 2015 at 7:37 pm #

    Hi..i cant open the router browser (192.168.1.1) after mistakenly change some setting in Access control list.. i used lan port when accessing the browser. What should i do to be able to access the browser again? thanks for your help 😉

    • Yui March 7, 2015 at 7:47 am #

      perhaps you have to reset modem to restore default settings, if you have changed access settings so you no more can access your modem

      • JURIN March 7, 2015 at 8:51 pm #

        ohh thank you ya..appreciate your reply 🙂

  8. kong March 3, 2015 at 7:33 pm #

    can i know? how to reset the modern? cause i couldn’t log in and password.

    • Thisbeast March 3, 2015 at 8:03 pm #

      Just get a pin and reset it from the back of the modem (look for small hole with word Reset)

  9. yieyio February 20, 2015 at 3:22 pm #

    What is the setting for the modem, i have restore default the modem but forgot to backup before restore default.

    • Thisbeast February 20, 2015 at 3:43 pm #

      Hi, you should have your Streamyx ID and password ready to go and follow the quick setup guide.

  10. KISH February 18, 2015 at 9:20 pm #

    Hey.. hello would u pls guide me to update the software of the modem…its askin to choose a software file ………..to update the software

    • Yui February 18, 2015 at 9:30 pm #

      you can get new firmware from modem vendor site, ensure HW revision and model exactly matching, dont flash over wifi, use ethernet cable.
      Instructions usually provided by vendor, on the page where you can download firmware.

    • Thisbeast February 18, 2015 at 10:04 pm #

      I assume you have already download the firmware from http://www.innacomm.com.my/?page_id=22

      However, I don’t encourage you to update the firmware, I don’t think Innacomm modem is reliable. I would encourage you to buy a new modem and have full speed experience.

      The instruction how to update is on the same page from Innacomm.

← Older Comments
Newer Comments →