How-to Setup Streamyx Broadband Account on D-Link DSL-2750U Wireless N ADSL2+
It a trending question lately about DSL-2750U. I love my D-Link DSL-2750U and I have not been disappointed by the awesome signal inside and outside my house.
This is how I setup my D-Link Wireless N ADSL2+ Modem Router. I normally do not install any software from the CD that come with the unit.
Streamyx Account
Please make sure you have your details ready — check your Streamyx application form which you have pre-select during registration with Telekom.
- Streamyx Account Username (users@streamyx)
- Streamyx Account Password
Login to your D-Link DSL-2750U Modem with Mac OS or Windows
Step One
Please log in to your modem with standard Username & Password.
Open your browser and enter http://192.168.1.1
- Username: admin
- Password: admin
- Validate Code: Enter what you see on screen
D-Link DSL-2750U — Setup
Step Two
Go to the SETUP > Setup Wizard
You will go through 5 simple self-explanatory processes.
D-Link DSL-2750U — Change Modem password
Step Three
Type in your current password (admin) and replace it with your desire new password.
D-Link DSL-2750U — Set Time & Date
Step Four
I let mine automatically retrive and update time & date via dlink.com
D-Link DSL-2750U — Setup Streamyx Connection
Step Five
You should use PPPoE. Some may find PPPoA can be use without a problem, always stick to PPPoE if you are not sure.
Select from the drop down menu
- Country
- Internet Service Provider
- Protocol
The rest — You should stick to the default setting.
D-Link DSL-2750U SSID Setup
Step Six
Give your network a unique name (SSID) and choose a password for your network (WPA2)
D-Link DSL-2750U — Check your Setting and Complete
Last Step
Verify your setting and hit okay and you’re good to go. Your modem will now automatically reboot and will start connecting to the internet.
Trouble Shooting
If you follow the instructions and your telephone line is in working order, you should have no problem getting your modem to work.
Still having trouble?
- Make sure your Streamyx Account has a correct User ID & Password. Try log on to your Streamyx Account.
- Make sure your Modem DSL light is stable/ On.
- If Your DSL light is stable — light indicator on “Internet” should “blink” to establish an internet connection.
- Re-check your setting or reset your modem. Use a pin to reset your modem and repeat the setup above.
- Re-Check your DSL splitter — try swap cable around (phone line and modem line).
- If you have a spare modem (old working modem) try using it to cross check your telephone connection is in proper order.
- Pick up your phone and check the noise level (not Dial Tone). If too high you will have to call Telekom to fix it.
- Most silly mistake — forgot to plug in the telephone cable.
hi i have D-Link DSL-2750U router. but i want to share wifi through the 3G EVO ptcl Usb please help me…….
Sorry Jouharali, Don’t know how to help you with that.
Hi.. mine have problem.. cant connect my device thru wireless to the router..laptop, hp, tablet all failed to connect… but it is fine if using network cable..
I think you have accidentally switched off the Wi-Fi transmitter. https://thisbeast.com/unboxing-d-link-wireless-n-adsl2-modem-router/nggallery/image/d-link-adsl2-2750u-product-side/
try switch it on.
I can detect the wifi.. but when connecting to the wifi.. until ‘obtaining IP address’ then unsuccessfull.. looks like it is failed to obtain ip address..
Ok..now it is done.. login to the router.. go to wireless basics.. disable.. enable back..
hi.. srry.. ive been reading the posts..
using a DSL 2750U for the poast 4mths, no issues..
recently had a streamyx maintainance and since then cdnt connect to the internet..
reset modem and LAN settings.. keep getting a red light on the internet..
provider sed there is no prob with my line/connection..
so i changed back to the original streamyx modem DB108-WL.. no problems at all connecting..
wall port –> splitter –> modem
no line / connecyion problems..
so why cant i connect with my DSL 2750U ??
Faisal, if the old one works the new one should work too. It’s very hard to tell why it is not working on your case.
The red light does not indicate your internet faulty line for sure. Two possibilities I can think of, one, still mis-configure and two, perhaps your modem needs to claim for warranty time.
Let me know if you got it work.
I wonder if Streamyx has a phone support at all ) So many people are searching for solutions online using alternative access (other device or even other ISP)
they actually have a phone support..
but basically not very helpful if ur not using one of the standard modems provided by the service..
eg: get a line wth the modem provided.. then they will help u
Faisal, Did you get your modem working?
Hi…..I recently resetted my modem (DSL-2640T) and it seems that the VCI/VPI setting keeps returning to default value although I have set it at VCI 0 / VPI 35. Intermittently, the modem will goes back to default value of VCI of 8. And I have to set it to 0 again and again. Hope you can help out here.
Hello Choihb, I have the exact problem like yours with my old modem. I am not sure about you, but mine was struck by lightning before it went cranky.
If your modem is still under warranty, I highly suggest you bring it back for the warranty claim. If your DSL-2640T is from TM, gives them a call they will be very happy to change it for you.
I hope this help.
hi…thanks for the screen shots, i tried the same steps but was never able to using wifi only. so after much troubleshooting i did an extra step..from the Advanced Tab->Wireless Basics->Wireless Channel, instead of auto i selected 9, immedeately after that my wifi connected was working…hope this helps
Hi Rav! I’m glad it works for you! Thank you for the comment. You have a great day!
hi..how to setup dsl-2750u using celcom broadband??thanks
Hi Cooper, So sorry I can help you with that. Maybe I’ll do another post on how to setup DSL-2750U with broadband dongle. Thank you for your comment though. Cheers
hi, I have problem with the VPI/VCI setting, after I key in 0 (VPI) and 35 (VCi), a message appeared and says: “The PVC is already existed, please change the value of VPI/VCI, can anyone help? Thanks in advance.
HI Mak!
I use the default 0, 35 no problem. I would suggest you to reset your modem and see if it work.
Cheers
Mak, now that I read your message one more time — You don’t have to reenter those numbers. It is a default value.
i had a dsl-2640b, after setup, internet light still red….what gonna do?
Sintaxx,
Have you got your modem working? Have you tried trouble shoot?
Try using your password on Streamyx Account if you can log in, at least you know your password is correct.
Try to connect direct instead of using a splitter.
The red light might be indicating your password is wrong or your internet from the TM is not working properly. You should call TM to fix the internet issue.
+ enable logging for your router and check logs, it will give you clue what can be wrong
my cd is not getting run can u help me wit a new set up please???
Tiffany, Hi!
You do not need a CD installation.
Power up your modem and follow the installation above.
Good Luck!
Problem : PPPoA doesn’t work at all!
I using the same setting as your guide except I use WPA-PSK.
The DSL’s light doesn’t blink and work normal but the internet indicator didn’t light up.
I can use PPPoE but can’t use PPPoA!(You mentioned above PPPoA better than PPPoE so i want to give it a try)
My telephone line from the wall>Splitter>Modem.
Will it be more faster if i connected the telephone line directly into modem?
plausible. Currently my phone is not connected to the line. I connect my modem direct. no one can call in hahaha.
It will not be faster, splitter just filters low freq (voice) and high freq (adsl),
modem should be isolated from low freq and phone from high freq signals, some modems may disconnect adsl in case of incoming call (ring) if they are not isolated, and most of modems will disconnect if you make voice call or answer. ADSL speed factor depends on – distance from station and cable quality.
Hi Sonix!
I have no problem with PPPoA but if you can’t use it just change back to PPPoE. I realise it doesn’t speed up my internet anyway. 😀
Thank you for reply!