202 Responses to D-Link DSL-2750U Streamyx Broadband Setup

  1. recki July 17, 2012 at 12:02 pm #

    lampu dsl cuma kelap kelip ga mau nyala terus, knapa ya? apa salah colok ya? aq pakai modem usb stick apa bisa d pakai jg…..

    • netster July 22, 2012 at 6:35 pm #

      Recki, If your old modem is working, likely your new modem have not been configure properly.

      The DSL light “kelap kelip” because there’s no internet connection or misconfiguration or hardware misconfigure.

      Hope it help. 🙂

  2. nsceh1 July 11, 2012 at 5:32 pm #

    does this modem/router works with macintosh operating system as well ?

    • netster July 11, 2012 at 7:45 pm #

      I use Mac, no problem. I guess the answer to your question is, yes.

  3. Isabel Lopez Khoo July 3, 2012 at 5:41 pm #

    do you know how to set the QoS for this modem? i hv been trying and i cannnot figure it out yet 🙁

    • netster July 10, 2012 at 11:05 pm #

      Hi Isabel! I don’t use the QoS though, can’t help you on that 🙁

  4. RAX June 15, 2012 at 2:15 pm #

    im setting finish…y my internet light always red colour? 🙁

    • netster June 15, 2012 at 11:08 pm #

      The reason you are seeing the red light could be due to 2 problem.
      1. the splitter you use on the phone and internet could be wrong.
      2. The internet from ISP is interrupted by your problematic telephone line (noise, port issues etc…)

      You should call your internet provider to solve the issues. the Red light normally indicating there’s no internet connect from the telephone line.

  5. Hafiz June 7, 2012 at 11:32 am #

    Salam bro. aku ad reset modem dsl 2750u. pstu nk setting die cmne ? TQ

    • Fui Fa June 7, 2012 at 7:28 pm #

      Hafiz — You login masuk 192.168.1.1. Pas tu ikut arahan di atas 😀 Terima Kasih

      • Hafiz June 9, 2012 at 12:31 pm #

        Dah ikut ta

      • Hafiz June 9, 2012 at 12:33 pm #

        Dah ikut tapi still xblh. xtau ape mslh dia.

  6. Yui June 7, 2012 at 1:44 am #

    finally seeing d-link has put a captcha to protect admin dashboard, there are a lot of idiots that arent changing router passwords, this will at least protect vs scanning bots

    • Fui Fa June 7, 2012 at 3:55 pm #

      Yup and I don’t really like it hahahah

  7. Yoshi May 26, 2012 at 12:39 am #

    Hi there..I had a big trouble hope u can give some hint to help me with..

    I had this issue with IP address conflict problem when both of my laptop and desktop connecting to my wifi..so I googled the solution for this and I found one telling that changing IP adress and helping so I changed my starting IP adress from 192.168.1.1 to 192.168.1.100(I know I’m stupid >: ) and end up no Internet connection..ipconfig showing media disconnected..

    Is there anyway to reset ip adress to default without dsl bridge via Internet browser?

    I really need help with this..please reply to my email will ya 🙁

    my email is theblackparade7@hotmail.com

    Looking forward for ur solution..thanks!!

    • Fui Fa May 26, 2012 at 12:55 am #

      Hi Yoshi

      I think you can just reset it to Obtain DNS info from a WAN interface

      Try that 🙂

      • Yoshi May 26, 2012 at 1:18 am #

        So I have to reinstall my modem?

      • Yoshi May 26, 2012 at 1:25 am #

        To get to this setting I have to type the ip on a browser right?when I type this nothing come out..do I need an Internet connection to get to this step?or can u explain this solution a little more detail?
        Sorry I’m really not good on this 🙁

        • Fui Fa May 26, 2012 at 2:10 pm #

          Sorry Yoshi late reply.

          You don’t have to reinstall just “Apply” it will do the trick.

        • Fui Fa May 26, 2012 at 2:15 pm #

          Yoshi –

          1) 192.168.1.1
          2) go to Advance >DNS> choose Obtain DNS info from a WAN interface
          3) Click “Apply”

          It should work now. If it doesn’t you can try restart the modem on the modem physical button or go to >Maintenance > Reboot.

  8. Curtis May 12, 2012 at 1:12 pm #

    Hi, i am having problems with my D-Link DSL-2750U. It does not keep the connection and sometime the red light on the internet is on. The line has been tested and is fine.
    Secondly, i want to setup the Port Forwarding and Port Triggering to enable me to do a VPN connection to my pc.

    Your help will be appreciated

    Regards
    Curtis

    • Fui Fa May 12, 2012 at 6:11 pm #

      Hi Curtis – I can’t help you with the Port Forwarding and Port Triggering for use with VPN. I have never use it myself.

      as for the “sometime the red light on the internet is on” is probably due to the poor internet service from your provider. You may need to check with your ISP to see if they can fix it.

      The one thing I learn about copper line with ADSL service for pass few years is that — sometime they are really unreliable.

      1. 1. The distant between you and your telco is a factor for good service. http://www.dslreports.com/faq/4676
      2. 2. The age of your telephone line (copper) due to tear and wear another factor. Telco provider do not see it as a priority to change since copper line is expensive. In my place for example — we have a rampant of cable theft. Just recently the cable were stolen and we have service disruption for more than 2 weeks by the time the cable were fix — my internet service were slow and not stable.

      anyway, do keep us update if you know what causing the problem in the end.

      Cheers

  9. skskuan May 5, 2012 at 11:08 pm #

    His right, i’m too unable to configure….internet light stick to red….what’s going on? My old modem works beautifully. Is there anything we should do besides the basic setup you mention above? Why my default gateaway = empty?

    • Fui Fa May 6, 2012 at 12:26 am #

      If your modem stay RED — the modem isn’t receiving any internet connection from the telephone line. Try connect direct instead of using Spliter.

    • Fui Fa May 6, 2012 at 4:59 pm #

      Did you manage to get it working please update so we can learn from each other.

  10. zulfikar April 24, 2012 at 12:08 am #

    Hello there, i was trouble shooting the same router that u have but i cant seem to get it connected to the internet. i’ve checked all the setting, reset the router 4 times, but still it doesnt reboot the router and the internet light is not on. after the last step of pressing apply, it doesnt reboot by itself..instead it takes me back to the setup wizard page. checked the password etc..everything is correct. Would you be able to help? i’m losing my mind.

    • Fui Fa April 24, 2012 at 12:25 am #

      Hi Zul – referring to your statement “Internet light is not on”

      If you connected the modem to your telephone line and the DSL line is stable but the internet line is not blinking (unconfigured) — you have a very high potential of having internet disruption in your area.

      You can never be sure unless you call the telco to verify — check if there’s problem with the internet service.

      • zulfikar April 24, 2012 at 1:12 pm #

        hello Fui Fa,

        Thanks for the prompt reply, When i called 100, and keyed in my house phone number the automated system does say that there is an internet disruption in my area, but when i installed my old router back, the internet is ok. Could it still be the internet disruption theory? I could try again when the internet is not disrupted..but its been disrupted since the 12th of this month and its been 2 weeks. Any other possibilities? Thank you for your time 🙂

        • Fui Fa April 24, 2012 at 2:26 pm #

          Zul – if the old modem work than your new modem should work.

          Try direct connect (skipped the DSL splitter) In case the the splitter was the problem. Also in my case — phone line and DSL line can not be switch places in the splitter — it didn’t work during my test.

          Would you be able to double confirm your password is entered correctly?

          Good luck — let me know if you got it working.

          • hafiz October 17, 2012 at 1:39 pm #

            ni utk streamyx. kalau yes dongle 4g boleh seting gak ke

            • netster October 17, 2012 at 8:52 pm #

              Hafiz, Modem ni ade USB port untuk modem dongle. I tak pernah try, tapi saya rasa no problem 🙂

        • Fui Fa April 24, 2012 at 2:35 pm #

          By the way may I know —

          How long have you purchase this modem unit?